In episode #58 we talk over how to not get burnt out with making, how to come up with new inspiration and ideas, what materials we would like to work with and have a tone of audio issues.
Read More
In episode #58 guest speaker Brett Mcafee, we talk about how we design our work and come up with creative designs, also answer your questions. https://www.youtube.com/channel/UCPqU-cg2Ko_Q1Q0SamoZt4w
Read More
In episode #58 Zack bursts a pipe and makes BEGS We talk about how to dry a log and how to carve up an axe handle
Read More
In episode #57 We talk about a foot, wind, and water driven shop. How to work with Corian solid surface countertop and the joys of leather working.
Read More
In episode #56 We answer your questions about spending time getting clients or making videos, How do you break away from pine and get into hard woods. And the best joke of the week yet!
Read More
In episode #55 We talk about the spring pole lathe and a lot of the turning tools for both the powered lathe and the foot-powered lathe. we also answer viewer questions such as, when to use a drum sander.
Read More
In episode #53 We talk about the foot powered lathe, the trip to Germany. as what angle should you use a crosscut or a rip cut saw, how much your wife influences your work and other listener questions.
Read More
In episode #53 We meet then new co-host of the podcast and announce the new name. We also answer a question about big auger bits and how we built our brands.
Read More
In this episode, Johnny says farewell to the Crafted Podcast! The show will continue on with James and Zack under a different name, so keep listening next week.
Read More
In this week's episode, Johnny, James, and Zack talk about how they deal with bug infested wood, reusing old Oak flooring, and how they stay motivated. Enjoy!
Read More
In this week's episode, Johnny, James, and Zack discuss whether design, content, or usability come first when planning out a project. They also answer more listener questions! Enjoy.
Read More
We apologize for the delay in publishing and the poor audio quality on this episode. Our typical recording system for the show went on the fritz and we were trying to get a response from their support system to no avail. We had to use the YouTube live stream audio, which isn't the best but hopefully still good enough. Thanks!
Read More
In this episode, Johnny, James, and Zack who inspires us as makers and content creators.
Read More
In this episode, Johnny, James, and Zack how making things have changed their lives.
Read More
In this episode, Johnny, James, and Zack talk about digital fabrication (CNC, 3D printing, etc.) and how these technologies are changing the workshop, for the good and bad.
Read More
In this episode, Johnny, James, and Zack talk about how they try and deal with potential issues with future projects before that actually happen.
Read More
In this episode, Johnny, James, and Zack give each other one project challenge that puts them outside of their comfort zone. The catch is we actually have to build the projects.
Read More
In this episode, Johnny, James, and Zack answers listener questions about working with Ash, the DEWALT media event, and best selling woodworking projects. Enjoy!
Read More
In this episode, Johnny, James, and Zack talk about how to mark in the digital space when you’re a woodworker, metalworker, maker, or anything in between.
Read More
In this episode, Johnny, James, and Zack talk about their methods for staying organized while working on their woodworking projects, keeping track of new ideas, and more.
Read More