These are the .stl files needed to print all of the Kumiko jigs. They are ready for the slicer of your choice.
It includes:
Both square jigs
Both hexagonal jigs
Slider stop for jigs
Thickness gauge
Hexagonal Hal flap jig
Square Hal flap jig
These are designed for stock that is 3/4” x 3/16”
You will need 3 heat-set threaded inserts per jig. If you make all 4 jigs, you will need 12 inserts. They are designed for 6 mm inserts here: https://link.amazon/B057tuUh7
You will need one threaded thumb screw per jig. If you make all 4 jigs, you will need 4 thumb screws. These are the thumb screws we used: https://link.amazon/B06uZ4zWU
We print with a 3mm wall and 15% infill
These are the .stl files needed to print all of the Kumiko jigs. They are ready for the slicer of your choice.
It includes:
Both square jigs
Both hexagonal jigs
Slider stop for jigs
Thickness gauge
Hexagonal Hal flap jig
Square Hal flap jig
These are designed for stock that is 3/4” x 3/16”
You will need 3 heat-set threaded inserts per jig. If you make all 4 jigs, you will need 12 inserts. They are designed for 6 mm inserts here: https://link.amazon/B057tuUh7
You will need one threaded thumb screw per jig. If you make all 4 jigs, you will need 4 thumb screws. These are the thumb screws we used: https://link.amazon/B06uZ4zWU
We print with a 3mm wall and 15% infill
