In episode #71 We talk about Electronics in projects, Zacks Amps, the difference between building and making, the Image challenge winner. And James’s sticky situations.

In episode #70 we look at the photo Challenge, talk about Zacks Car, Find out how crazy James is for glue. We also answer the question on cheap planes and epoxy movement in relation for wood

In episode #69 we talk about The great glue test, Installing Will’s  vanity, Finish for coasters Best angle for cameras, new Hashtag for picture challenge and the worst joke of the week yet

In episode #67 We talk about Workbench Con, How to get better video footage and we introduce a new Challenge for the community. What surface should the strop have with buffing compound, and how to find White oak for $.75 a BF.

In episode #67 we have special guest Shaun Boyd of the Shaun Boyd youtube channel, Saving the bark on live edge for a bigger beefer Bark, how to get started with marketing, Shipping Vs. Just local sales.

In episode #65 We talk about all the problems we have been having i the shop and how we respond to them, the recent meetup with Will and James, epoxy choices, Hand cutting finger joints, What james did in the past and the worst joke of the week yet!

In episode #64 We look at upcoming leather working, blacksmithing, and figured wood projects. Also James’ trip to see Will. we answer your questions about a flex shaft and belt sander grinder attachment. As well as give the joke of the week and talk about what we are watching.

In episode #63  we talk about Sharpening methods, water vs window cleaner on diamonds, bending metal back into place, Doing a meet up and more.

In episode #62 we look back at the last year and see what we like and did not like what are our goals for the future. We also look at Will’s Grizzly build Zack’s Sculpture and James’s Side table. Along with Pinewood Derby cars

In episode #61 We have a special guest Shannon Rogers of the HAnd Tool School. We talk about methods of turning, getting a mirror edge on a diamond plate, and different types of strops and stropping compounds.

In episode #58 we talk over how to not get burnt out with making, how to come up with new inspiration and ideas, what materials we would like to work with and have a tone of audio issues.

In episode #58 guest speaker Brett Mcafee, we talk about how we design our work and come up with creative designs, also answer your questions. https://www.youtube.com/channel/UCPqU-cg2Ko_Q1Q0SamoZt4w

In episode #58 Zack bursts a pipe and makes BEGS We talk about how to dry a log and how to carve up an axe handle

In episode #57 We talk about a foot, wind, and water driven shop. How to work with Corian solid surface countertop and the joys of leather working.

In episode #56 We answer your questions about spending time getting clients or making videos, How do you break away from pine and get into hard woods. And the best joke of the week yet!

In episode #55 We talk about the spring pole lathe and a lot of the turning tools for both the powered lathe and the foot-powered lathe. we also answer viewer questions such as, when to use a drum sander.

In episode #53 We talk about the foot powered lathe, the trip to Germany. as what angle should you use a crosscut or a rip cut saw, how much your wife influences your work and other listener questions. 

In episode #53 We meet then new co-host of the podcast and announce the new name. We also answer a question about big auger bits and how we built our brands.

In this episode, Johnny says farewell to the Crafted Podcast! The show will continue on with James and Zack under a different name, so keep listening next week.